Most crucial tips for sharpening your hunting knife
Sharpening a hunting knife can be considered an important art or a simple regular exercise to keep the blade sharp. For a hunter, sharpening the knife is part of the critical preparation for every hunting session and must be mastered well.
Whether the task is being done at home or in the hunting field, you need to have all the necessary tips to keep the knife as sharp as possible. Here are the most crucial tips that will make your knife sharper for a perfect for hunting as well as associated tasks.
Note the right blade sharpening angle
Irrespective of the material you are using to sharpen the knife with, it is the angle that matters most. If the angle to the surface is very large, the sharpness might not last for long. Consider sharpening at an angle of about 20 degrees and keep it consistent.
Keep it easy when sharpening hunting knife
Many hunting novices make the mistake of exerting a lot of pressure on the blade when sharpening it. In this case, more is not always good. All that one requires is to rub consistently with a light grip until the targeted sharpness is reached. Though sharpening can be done anytime, it is advisable to do it when one has ample time.
Select the right sharpening rock
One of the oldest knife sharpening methods is using a stone. However, not every rock can be used as a sharpener. If you are sharpening a very dull knife, consider selecting a rough stone with low grit density. For a very blunt blade, the hunter will need more time to get a perfect edge for hunting. To make knife sharpening easier, it is important to ensure it is in its top condition always because bringing it to life after any exercise is easier and fast.
Select personally preferred stone
Though many sharpening stones are effective when dry or wet, some easily disintegrate after getting into contact with water or oil. It is prudent that a hunter carefully reads through the manufacturer’s guide and follows the outlined instructions with precision. If one uses the wrong type of lubricant, it can cause blade particles to loosen and clog the sharpener’s surface. The overall impact is slowing down of the sharpening process.
Test your blade after a sharpening session
If you think that the blade is sharp enough, test it on a small section of paper or leaf. If it gives a clean and smooth cut, it is sharp enough and ready for your hunting expedition. Never test the sharpness of your hunting knife using the hand or any part of the body because you risk getting harmed. Once you are done with sharpening the hunting knife, make sure to fold it well in its holder or storage sheath ready for use.
One maintenance tip that every hunting knife holder should never forget is that sharpening should be done after every hunting expedition. Water, blood, and vegetation sap are corrosive if allowed to stick on the blade for long. Therefore, clean the knife immediately after a hunting expedition and sharpen it before storage. Keep the blade sharp to make every hunting exercise enthralling.